Amogus MX Fidget Clicker
Description
A nicely sized stupid Among Us shaped fidget toy using a standard MX mechanical keyboard switch and a keycap of various sizes. Fits snug in the hand with a grip similar to holding a phone. Included are files that work with 1U - 2.25U keycaps. Print for whatever size you have available. (If you don't know what that means: 1U is a standard keycap (like on the letters), and the larger numbers are the larger keycaps (like Shift, Backspace, etc)) Larger keycaps would need a larger model and I'm currently too lazy for that. Plus I doubt it would feel nice without adding stabilizers. __Instructions:__ First choose what size keycap you're going to use. I recommend printing with multicolor using M600 color swaps, using a darker color for the 'outlines'. Assuming a 0.2mm layer height, the color changes should be inserted at: 1: 3.0mm 2: 12.2mm 3: 15.2mm This will give you the same effect as the one in my photos. I printed with 2 perimeters, 4 top/bottom, 16% infill. I used Eryone Galaxy Black PLA and Polymaker Polyterra Marble PLA. Printed on my modified Elegoo Neptune 2 with a 2-in-1-out Y adapter dual extrusion system.
Statistics
Likes
0
Downloads
0