Spinning Wheel (Drive Wheel, 50cm) Γ
Description
The drive wheel for a spinning wheel, for spinning fibre into yarn. It is designed to use 4× (22⌀ × 7)mm ball racers and M8mm⌀ bolts in the Hub. I used https://www.thingiverse.com/thing:2685010 as the bobbin and https://www.thingiverse.com/thing:2655802 as the flyer. 3mm polyurethane transmission belt as the drive band. The complete printed unit should weigh roughly 1.3kg. You will need: 2× HUB 2× HUB BOLT 6× SEGMENT 6× RIM BOLT 2× BOLT STRIPS
Statistics
Likes
0
Downloads
0