Hazbin Hotel Clock Tower
Description
This is the Clock Tower seen at the beginning of the Pilot Episode for Hazbin Hotel by Vivziepop. It counts down the time between the annual purges in Hell. I've always had a soft spot for clock towers, and am also a tremendous fan of Vivienne's work, so I decided this would be a good first project to tackle in Tinkercad. The parts are all designed with interlocking parts to hold them together, and all have small tolerances built in to HOPEFULLY make them go together much more smoothly. This made a huge difference in my test prints, and hopefully it does for any of you as well. Included are many part variations to make it easier to print with the quality you want from it. As an example, there are multiple variations of the clock faces, allowing you to print either an all in piece, or to print the dials seperately, face up to get a cleaner look. The faces also have a variant that should allow you to install quartz clock movements for anyone who wants to make theirs actually work. (I will test this in the future) There are also options for things like the central tower, which can be printed in one piece, or in sections, to make scaling the print up easier. By default, the print comes out at 8 inches, or 20 centimeters tall, and was scaled so the largest piece could be printed on my photon with some wiggle room. I realize now that I also forgot the teeth on the roof, so, I will add those parts at some later time, when I figure out how to make it interlock easily.
Statistics
Likes
0
Downloads
0