Ring Indoor Cam 45deg wall mount
Description
A simple but stylish 45deg wall mount for the Ring Indoor Cam wired. Stick 2 nuts in the back of the 45deg mount, can be mounted 45deg to left, or right, check the quick-mount plate that comes with the camera to see which holes need nuts. You can use any M3x10mm bolt, I used Socket Head Cap Screws. Mount the quick-mount plate to the 45deg wall mount. Mark the 2 holes using the 45deg wall mount as a template, drill 6x40mm holes in the wall, insert plugs, hold 45deg mount in place, screw it on using the 4x40mm screws. Click on the Ring indoor cam, and hey presto! Print in whatever material, I just used white PLA as it is not in direct sunlight (do not use dark PLA in a spot with direct sunlight, period) 2x M3 nut 2x M3 SHCS 10mm 2x wall plug 6x30mm 2x 4mm screw (I used 4x40mm torx)
Statistics
Likes
0
Downloads
0