HextrudORT for kP3S - V6 Hotend
Description
Try to adapt the HextrudORT from HevORT to the Kp3s trolley and the V6 hotend. may be subject to change and improvement the hextrudORT needs BMG gears W.I.P. Screw M3, nuts M3 Print Settings Brims/Rafts ─ OPTIONAL Supports ─ Yes Wall Thickness ─ ≥1.2mm Top/Bottom Thickness ─ ≥1.2mm Infill ─ 30% Filament material: PETG, ABS, CPE-HG100, ASA, PETG carbon Notes: I recommend 4 wall/perimeters for the heat-insert.
Statistics
Likes
0
Downloads
0