Worker Swift - Bolt Action
Description
This is a Bolt Action grip for the Worker Swift, sturdy enough that you can also abuse it just like a normal handle if you print it that way. for attaching it you will need the following file: TEXE_WS_NewInsert.stl from here: https://www.thingiverse.com/thing:4895218/files Also slightly longer screws. (m3) I'd recommend to twist the Handle down and forward slightly, that way you will push the whole grip straight back instead of slightly sideways. At least with 1.4 and 1.6 Springs The "loader grip" printed with 100% infill and ABS and slightly thicker nozzle width can withstand 1.4 spring prime easily. Depending on your printer and fillament it might take the abuse of 1000 of loadings with a 1.6 Spring. I couldn't get it to last with a 1.8 Spring. Even as nylon print.It would crack and break after 1 -3 time use. The hole has an ID of 12.1mm ~ so a 12mm metal Rod will fit, and that's what I am using for my 1.8 spring setup.
Statistics
Likes
0
Downloads
0