Front Panel I/O (USB+Audio) for Retro PC case with floppy disk hole
Description
Some vintage PC cases have a floppy disk hole molded into the plastic faceplate. In a modern PC build using a retro PC case, that hole is pretty useless. This is designed to turn that useless floppy disk hole into a more useful and modern front panel I/O (USB + audio), which are ubiquitous in modern cases but not usually found in vintage cases. It is a replacement housing for the commonly available "USB 3.0 2-Port 3.5 Inches Metal Front Panel USB Hub with 1 HD Audio Output" that raises the ports up higher so that they align with the floppy drive hole. If your PCB measures 44.67mm between the USB ports and 13.67mm between the audio jacks, it should align with the holes in this faceplate. Whether your flash drives, USB cables, or audio jacks will fit into the floppy disk hole depends on the design of the case and size of the hole.
Statistics
Likes
0
Downloads
0