The Cable Ring
Description
## The Cable Ring ### This is a **print-in-place** 2 part cable ring that lets you organize various power, display, usb and other types of cables. Better than zip ties and velcro straps! #### Features - The rings print in place with a 0.25mm clearance that should print well on all hobbyist printers, and can be separated by bending the rings - no tools required! - The rings feature a dedicated space for a 12mm label used by various label makers - Included STLs in 5 different sizes - Prints well with simple PLA, does not require any supports - Each ring prints in under an hour even with conservative settings #### Size guide There are 5 sizes included. The sizes indicate the inner diameter (ID) of the ring - the ring's thickness and other dimensions are constant across sizes: - 20mm - for slim cables such as usb and other charging cables - 25mm - for slim display and power cables, such as VGA and 2 prong power - 30mm - for thicker display and power cables, such as HDMI, DP, and PC power supply cables - 35mm - a more forgiving fit for thicker cables - 40mm - for thick power cables such as extension cords
Statistics
Likes
0
Downloads
0