Pencil Clip for Brass Instruments
Description
# penClip3D-brasses Pencil Clip for Brass Instruments (the bests, especially trombone) to be 3D printed. # I personally use a Creality Ender-3 with the following settings: - Layer Height: 22 mm - Wall thickness: 0.8 mm (2 Wall Lines) - Top/Bottom layers: 4 - Ironing: Enabled ✓ - Ironing Speed: 10 mm/s - Infill Density: 15% - Infill Patter: Quarter Cubic - Printing Temperature: 200°C - Buil Plate: 60°C - Print Speed: 150 mm/s - Initial Layer Speed: 60 mm/s - Enable Retraction: Enabled ✓ - Retraction Distance: 5 mm - Retraction Speed: 50 mm/s - Enable Print Cooling: Enabled ✓ - Fan Speed: 100% - Generate Support: Disabled X Of course, feel free to experiment with any other settings and modify the original design.
Statistics
Likes
0
Downloads
0