Micro Swiss Cooler v1.2 for Ender3v2
Description
Ender 3v2 Micro Swiss cooler Utilizing 1x 4015mm and 1x 4010 blower fans. 4010 fan requires no screws. BLTouch fixed bracket included. There's a 2-3mm clearance from the printed part to the silicon sock and with testing for 30min at 230°C no melting occurred with PLA+, so far. Recommend printing in a higher temp resistant filament though like ABS+. Orientate the stl with teh flatest side down on your slicer of choice with no supports required. Anyway this design works for me running the extruder fan at 65-75% speed and the part fan at 100% when required. Generally all fixings are m3 and the Micro Swiss mount requires some thread tapping for this to work where the top two v-slot axels are. BOM 2/ m6 x8mm BHSC screws - tap holes as explained above. 1/ m3 x6mm BHSC screws - fixing below BLTouch into already theaded hole on MS bracket 2/ m3 x6mm SHCS screws - fixings to mount the BLTouch 2/ m3 x12mm SHCS screws - fixing for the part ducting 3/ m3 x20mm SHCS screws - fixing cap plate and front and back printed parts together 2/ m3 x25mm SHCS screws - upper fan fixing 2/ m2.5 x10mm SHCS self tapping screws - fixing prints together m3 brass inserts Have fun and donate if you think my time was worth it.
Statistics
Likes
0
Downloads
0