Themed Keycaps for a Logitech Keyboard (Round Keycaps)
Description
These are sets of alphabetical and numerical keycaps with the round theme. I was bored of the feel and sound of the stock keycaps. (They sounded too loud and hollow.) These keycaps should sound much quieter and have a deeper sound when printed with 100 percent infill. Download round keys (15).stl for the alphabetical keycaps and round keys (16).stl for the numerical ones. Each file includes every keycap for the alphabet and numbers. Download the file and import it into your design program. From there, you should only make groups of 3 or 4 keycaps at a time to reduce the possibilty of printing complications. If you are printing only a certain key to replace broken ones, make a group containing only that keycap and go from there. These keycaps were designed for and tested on the following keyboards: Newer Logitech K120 Old Logitech K120 (the one with the old Logitech logo in the top right corner of the keyboard. Carefully sand around the edges of the square part of each keycap until the key can actuate up and down smoothly without jamming. Do not attempt to install the keycap in without a little sanding work first. This can result in damage to the keycap socket and the mechanical switch below it.
Statistics
Likes
0
Downloads
0