Deej Enclosure - 5 sliders + rotary pot
Description
A Deej enclosure (https://github.com/omriharel/deej) using 5 sliders and a rotary pot. Sliders: http://www.banzaimusic.com/Alpha-Slide-Pot-SP60DT-10K-lin.html Rotary pot: https://uk.rs-online.com/web/p/potentiometers/7904401 Arduino: Pro Micro You will need 12x M2x4 (2 for each slider and 2 for the arduino cover) screws and 4x M3x4 (although the screw holes for attaching the lid are long enough to accommodate longer screws). I used socket cap screws, but that's not really important. If you don't plan to use heat-set inserts for attaching the lid, you will need to modify the holes to allow the M3 screws to tap into the plastic. STEP files provided for any modifications. The rotary pot I used has a 10mm diameter stem, so this may need to be adjusted if you plan to use a different pot. Printing notes: - I printed the lid with 0.15mm resolution to get the curved edge as smooth as possible. The rest was printed at 0.2mm - The walls will let some light from the Arduino's LED bleed through. This can be prevented by applying electrical tape to the inside surfaces, or potentially by increasing infill. - The lid may need to be printed with support so the screw holes print properly
Statistics
Likes
0
Downloads
0