VintageAir Gen II Mini Lower Vent Adapters
Description
These are adapters for the lower floor vent ducts on the VintageAir Gen II Mini automobile heating/air conditioning system. The existing exit vents assume the unit is mounted under a dashboard and close to the floor. However, if it's mounted higher or deeper behind the dashboard, you might need to route ducting to keep the lower "floor" vents from blowing on electronics or other components. These adapters are designed to be printed in ABS and glued, using ABS cement, to the ABS plastic housing of the Gen II Mini unit. From there, standard 2" defroster duct hose can be attached to move the air flow away from the unit behind the dash and closer toward the occupants' feet. **Should be printed in ABS so it can be glued to the ABS housing using ABS cement.
Statistics
Likes
0
Downloads
0