Fire alarm mount
Description
A mount for a fire alarm (in my case, the X-Sense XS01-WT) to be attached to the upper extrusion of my Ender 3 Pro. The screw holes are 2.4 mm in diameter and 9.0 mm deep. The screw holes are 37.0 mm apart (center-to-center). The entire mount is 46.0 mm wide, 46.0 mm tall (measuring from the top of the mount to the top of the clip; i.e. it extends 46.0 mm above the top of the extrusion), and 12.5 mm thick. The clips are a loose fit, so the mount can slide around without difficulty.
Statistics
Likes
0
Downloads
0