Aquarium Siphon Adapter 1in PVC
Description
I needed a very long siphon vacuum to reach the bottom of my very tall fish tanks. I had some 1 inch clear pvc and a length of siphon hose. It has a slight taper fit similar to normal PVC fittings. You may need to scale it up or down a little to fit your specific PVC (They do have variations from pipe to pipe. Can be used on clear or normal PVC they have the same diameter specifications. Print large end on the build plate, you shouldn't need supports. Its built to print quickly with out supports. I did discover it is not water/air tight with FDM. You may want to seal it with something. It wasn't an issue as that part was still under water for me (my tank is very deep). Note: There is a weird 0 thickness artifact layer where the cone and main body meshes meet. I couldn't get it to go away, and franky didn't care enough to try. Didn't cause any slicer or printer issues (Using Cura). Just an FYI to keep an eye on.
Statistics
Likes
0
Downloads
0