2x5 Terminal Block
Description
So, I had a need to connect several .5 ohm speakers together. Rather than running 9 wires to each positive and negative, left and right, I created this block to bring them all together. It does require some additional hardware. I used #6-32 5/16" screws and nuts along with some electrical conductive copper tape. The block itself is split in half so that no supports are needed. The top rail is simply to provide a ridge for the screw heads. If printed as uploaded, the screws will not stick out of the bottom. Created out of necessity. Enjoy...this is my first upload!
Statistics
Likes
0
Downloads
0