SOVOL SV02 4020 Fan Shroud Ender7
Description
This is a remix of Schnabulation's design, I took a lot of time to design it because working from the STL was not easy and I'm not a good fusion360 designer. - I removed the hinge so now it is a single rigid part (it was long enough to design it as is). - Designed for a 40x20 fan, I used a Noctua NF-A4x20 PWM which is really silent. - An internal fan duct is also provided, using a silent fan as the noctua provide enough air flow to print ABS and other high temperature materials. - No need to drill or modify the SV02. - I adapted it to the SOVOL SV02 - Compatible with my other mod : Sailfin Direct Drive https://www.thingiverse.com/thing:5427756 You can print it with few walls, even 1 wall should work if you want to chase any extra gram. I printed the final version using 2 walls. It will require supports for the central part (see picture), I used the "conical support" option in Cura. I recommend ABS as the fan ducts are touching the insulating material covering the heat block. So far I had no problem with that, after 150+ hours printing ABS and other filaments with this design.
Statistics
Likes
0
Downloads
0