df-64 g-iota grind indicator
Description
DF64 simple grind indicator. FOR DF64 / G-IOTA version 2 (the one with new font, but probably works with first version also ... not sure...) I've tried other indicators and they were not what I wanted. (either too big, either the grind size circle was not covering the numbers correctly ) Designed a simple one, with dimensions for proper printing with an 0.4mm printer. The fit is very tight, but I wanted to be like that, to be hard to move by mistake. I wanted something very thin. The thickness dimensions are multiple of 0.4mm. I suggest to take out the option "fill gaps between walls", as this is a thin object and makes it messy. Be sure that the small circle which will cover the grind size number is printed with 2 walls. ( it's 0.8mm wide and it should be ok by default) If the fit it's too tight/loose I believe you can just scale it in very small increments and retry (doesn't take long to print it) I also suggest to print it with brim or raft, if you have issues with small and delicate objects, but with a good setup should be fine without any.
Statistics
Likes
0
Downloads
0