Pimoroni Pibow Coupe 4 case SSD mount 2.5 inch drive for Raspberry Pi 4
Description
Here is a simple design to hold a 2.5'' SSD drive below a Raspberry Pi 4 Coupe Case. In order for the Pi to have air flow, the SSD is held away from the base. This was designed to be used with a Pi running Home Assistant, replacing the SD card with the SSD. I replaced the plastic nuts and bolts with 30mm M3 bolts and screwed straight into the plastic, no nut needed. I printed this in PETG but any material would suit. You may need to print with a brim as it's only a few walls think.
Statistics
Likes
0
Downloads
0