Agat-9 Board Holders
Description
These are 3D models of the circuit board holders for the Russian-made Agat-9 computer. There are 2 models - front and back holders. Use the screws with wide flat heads (for example PC screws that were used for floppy drives or CD-ROMs) to fit the holders onto the board. You will need 2 nuts too. The same screws can be used to secure the board onto the metal rails. If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page: https://www.thingiverse.com/Wierzbowsky/designs
Statistics
Likes
0
Downloads
0