Customisable parametric standoff spacer
Description
I needed some spacers to create an air gap for cooling a Raspberry Pi being mounted behind a unit. I'd printed one of these cases which, as the designer comments, won't actually let air through the bottom slots - https://www.thingiverse.com/thing:4785712 Searching on Thingiverse didn't quickly turn up something suitable, so I put together a simple design in openSCAD. It's easy to change the parameters in the .scad file to make spacers that will fit any specific application. But beware - if you put strange values in, you'll get strange results out. The .stl file will print four spacers, 6mm high to fit over M4 bolts.
Statistics
Likes
0
Downloads
0