Water point for small birds
Description
Water point for small birds. printed in PETG, the perch is held in place with M3 screws in melt-in threads. the bottle is a 500ml laboratory bottle with a 54mm thread. It is important during assembly that the bottle has an inclination of 9°, >8° can work, >11° it overflows. the angle of the wall bracket can be adjusted, so you can set the optimum angle yourself. So that the pressure is waterproof, I slowly with 40mm/sec. printed and 5 top layers used. https://www.amazon.de/gp/product/B076H8PQ4Y/ref=ppx_yo_dt_b_asin_title_o05_s00?
Statistics
Likes
0
Downloads
0