Atari 2600 Cart Holder
Description
This is a short shelf friendly Atari 2600 Cartridge Holder, this is the third iteration, and I will gladly accept constructive criticism. I designed this because space is a hard thing to come by, and I have a lot of 2600 carts. So I made a short shelf friendly design, that can be assembled, with "short" print times. On both my Ender 3 pro, and my Hictop i3 all combined parts take approx. 7 hrs. for one completed holder. But I use both to cut time down, and I need a few of these things. For one holder you'll need 1 F-Panel, 1 R-Panel, and 12 H-Slides and a tube of superglue is preferable/req. depending on printer. Once printed I just inserted one sides worth of H-Slides into the front panel, then slid the rear panel onto the slides. then inserted the rest of the slides, and pulled one at a time to be glued. Once glued, it seems to be fairly strong and works quite well. And, a final note, to those curious, I will be making more for my other console carts, and do plan to share them here. So if you're curious, follow my page.
Statistics
Likes
0
Downloads
0