Netflix and Chill Led Sign
Description
Netflix & Chill LED Sign I used 3D Builder to make this. It is easy to print push-fit parts. I used 0.2mm for the 1st layer and 0.28 for the rest. Print Letters upside down. Used parts: Super Glue 12v RGB LED Strip Assembly: Install LED into the BACK COVER. On the bottom right there is a hole for the cable to go out. Install LETTERS into the LETTERS BASE by pressing them in. Use Glue if its too loose. After that glue both parts together, assembled letters base and back cover.
Statistics
Likes
0
Downloads
0