Rivian Center Console Organizer
Description
This is a center console organizer for the Rivian R1T/R1S. **Tray heights** Bottom - 134mm (to end up right below the USB C ports) Middle - 80mm Top - 70mm (This leaves about 6mm of space between the top tray and the lid) **Tray L x W** Bottom and middle - 154mm x 164mm Top - 175mm x 164mm The top and middle trays have a 2mm thick inset extension to help with stacking. They are designed to be removable. The bottom tray is not. Its purpose in life is to hold stuff and support the trays above. There are two version of the top tray. One with a change holder and a place to store cards, and one without. The one with organization needs to be printed at 10% size. I could not get CURA to slice properly unless I exported from SketchUp at 10x. (Yes, I know it's a design issue but I don't care. It worked for me.) There is room for the USB C cables to remain plugged in Printing time for me (i3 Mega S) was around 24-30 hours per tray with PETG and 20% infill.
Statistics
Likes
0
Downloads
0