FLSUN QQ-S Pro Ball-Effector assembly frame
Description
This is a small modification of the assembly frame from https://www.thingiverse.com/thing:4918775. In the original design you can not insert the end pieces of the rods. In this version there is a cutout for the small flags (where the springs are inserted). The length from center to center was 286mm (in the original design 288mm). It is best to measure this when you mount the arms. Important: When the arms are mounted, set the length with M665 L286 Parts used: Glue: https://www.amazon.de/Pattex-PSE6N-Stabilit-Express-80G/dp/B0000WPL8O/ref=sr_1_5?keywords=pattex+stabilit+express&qid=1658068290&sprefix=pattex+sta%2Caps%2C71&sr=8-5 Rods https://www.roboter-bausatz.de/p/carbon-rohr-40-cm?number=RBS13324 Balls https://www.roboter-bausatz.de/p/rostfreie-stahlkugel-mit-m4-gewinde?number=RBS10734 Also have a look at my small modification to use optical limit switches: https://www.thingiverse.com/thing:5435060
Statistics
Likes
0
Downloads
0