Voron Trident/2.4 - a Lightweight Toolhead with Direct Drive Extruder
Description
This toolhead is designed for Voron trident/2.4 compatible with the latest version of single MGN12 X. The design was inspired by Voron's stealthburner & clockwork, as well as the well known lightweight extruder Sherpa. Please note that you will loose 10mm of print distance of Y axis due to repositioning of the nozzle, unless you move the bed simultaneously. Currently supports only the NF-Crazy hotend (Mosquito clone). BOM: 4(+2)x M3x6 SHCS 6x M3x8 SHCS 2x M3x20 SHCS 1x M3x25 SHCS (or M3x20) 5x M3x30 SHCS 2x M3x40 BHCS 2x M3x50 SHCS/BHCS (for ADXL345) 2x M2x10 Self-tapping screw 5x M3x5x4 Heat set insert 8x M3 Hex nut NF-Crazy hotend 5015 blower fan 3010 fan BMG gear set with bearing & tensioner NEMA14 round pancake stepper Please refer to the photos attached for installation, and also take a look at the stealthburner [manual](https://github.com/VoronDesign/Voron-Afterburner/tree/sb-beta/Manual) regarding the installation of cooling fans. Resources: Voron stealthburner beta: https://github.com/VoronDesign/Voron-Afterburner/tree/sb-beta Sherpa mini extruder: https://github.com/Annex-Engineering/Sherpa_Mini-Extruder Klicky probe: https://github.com/jlas1/Klicky-Probe
Statistics
Likes
0
Downloads
0