Munchkin board and magnetic pawn
Description
This is a board for the Munchkin board game. The board has space to place a cut metal sheet 195x55mm 1mm thick with rounded corners greater than r5 , and the pawn has a hole for a 4x4 neodyme magnet. Simply drop the plate into the space during printing and make sure that the plate isn't higher than the currently printed layer. I made a pause at layer in cura to have time to place it corectly, you can put some glue so the plate doesn't move. If your printer is calibrated right you can press the magnet into the pawn, i drilled the hole with a 4mm diameter drill. The board fits perfectly the original Munchkin box. I printed it with a 0.6 nozzle and 0.2 layer height . I'm sharing STL files as well as Fusion360 files :) https://www.youtube.com/watch?v=NKIjh-H1fYs&ab_channel=PiotrCzerwonka
Statistics
Likes
0
Downloads
0