Fan Blade Puzzle
Description
- I HAVE NOT TESTED IT. I tested the first version and corrected the blade by dipping them in boiling water to get them the right shape, version 2 should be fine but I need someone to confirm. Thank you. -I wanted to share my design, i made this to print it with less support than possible So this is a fan blade i made for my litte 8inch fan .. the blade diameter is about 180mm/ 7 inch of diameter. The idea was to find a way to print the blade with almost no support. I had the idea to print the blades separately and join them as a puzzle. It works wonderfully. its about 2 hours by section (with .3 layer height) and i printed an adpter for the shaft of my fan. My fan has a 4mm shaft, so I design the adapter to have a solid fit with this shaft, the outside diameter of the adapter is 15mm.. it's strong enough to hold the blade but you can take it apart easily. I hope it will be usefull, at least to share the idea of puzzle style connections (not new but it worked so good for me :D).
Statistics
Likes
0
Downloads
0