Cable Cup
Description
Hi Folks, you have some cable sticking out of your ceiling? You want to hide them? Or you just connected a lamp to your ceiling and there are ugly cables visible? You don't want to go to the next hardware store only for this? You want to have a quick and cheap 3D printing solution for? Here you are! There are two versions of this thing, but in both cases the cups are held togehter by friction. V1 (Hiding open unconnected cables, shown on first picture) - This is fully parametric! - Printable in Vasemode V2 (Hiding calbes for lamps, see picture 2 and 3) - One additional hole in both cups on the vertical side to guide the cables to the lamp - Still parametric - NOT printable in Vasemode _____________________________________________________________________ How to: - I have added some demo .STL files to directly print. - To customize the design open the Fusion360 (.f3D) file Version1 - adjust the parameters, which should be self explanatory. - If you want to print in vase mode keep the wallthickness at 0.4 - 0.8 mm - set sclicer to vasemode and print This is a fully parametric design you can customize to your needs. This thing consists of two pieces a "bottom" part and a "Lid". You glue or screw the Bottom
Statistics
Likes
0
Downloads
0