Element Sendero HD Rear Bumper
Description
This clips and screws onto rear tube bed to give the bed support. It is also hinged to allow easier access to electronics. did not include hinge pins nor screws. 3 3mm screws will be required to mount the bracket to the bumper. I drilled the hinge holes out and also heated up my hinge pins and pressed them through to make the tolerances tighter. I have also raised the body aprox 10mm and switched the front bumper cross member with the rear. I imagine this would also work with out raising that modification but I did not test it.
Statistics
Likes
0
Downloads
0