FMS FCX24 rear battery box
Description
To install this battery box you should: - Remove the ESC, turn and glue again. This way the battery cable is enough long and it's better for servo cable. - Cut a little slot in the body (she photos) so the cable will arrive to the box. - Cut the shocks supports a couple of milimeters to make room to the box. It's easy to cut using a scalpel or cutter. I covered the cable with a small pieze of "snake skin" so the color cables (red and white) are hidden and only shows a blak hose. When insert the battery I left the balanced cables to the end, so I can use it to extract the battery easily.. Printed in PLA+. Any other material is suitable. I used a 2x16 mm screw to make the hinge. Screw travel from right to the left. In the latch I used an 1.6x6 mm screw. The latch housing has the exactly size to install again the chassis and the box can be glued centered withou take a lot of meassures.
Statistics
Likes
0
Downloads
0