Magician X Light Protector
Description
"Light Protector Box" works like a barrier from environmental light around the Z-axis sensor (forked light barrier). Why would you need this additional part? While I was working with My Magician X printer frequently experienced the nozzle (Z- axis) going down till it crashed into the bed, it didn't matter if it was printing a project or just auto leveling. So if your printer's nozzle is crashing you can try this solution. How did I know this was a solution? During a Z-axis crash, I used to check every part of the printer, including the sensor (my printer is positioned in a very light exposed area ) It was enough if I just passed my hand near the sensor for the printer to correct the nozzle position that is how I identified the issue, with this print it never crashed again. How to print the "Light Protector Box" layer height: 0.2 mm infill: 10% (it helps to protect from external light) wall count: 4 you can download the .STL file or the gCode if you want, also feel free to contact me notice that I also use the "Mingda Magician X Z-Sensor Workaround" by Tueftler-Maker https://www.thingiverse.com/thing:5193360 Note: I'm not an expert on 3d printers, but this is a solution that just helps my case, don't hesitate to get in touch with MINGDA support if you need they are really nice and ready to help
Statistics
Likes
0
Downloads
0