Dremel water pump attachment
Description
To assemble it you will also need m3x40 bolt and nut. First step is to attach holder.stl to dremel Next step is to assemble m3x40 bolt and nut with turbine Then you need to insert bolt into holder.stl so it fits into dremel chuck and tighten it through notch in holder.stl Last step is to attach case.stl to holder.stl using 6 m3x30bolts and glue it if needed. https://www.youtube.com/shorts/2e-kl4nDiro here is showcase of pump
Statistics
Likes
0
Downloads
0