Simplified Valve Index Wall Mount via Command Strips
Description
This mount provides a smooth surface to secure a Valve Index Base Station to a wall via command strips. TENFIRE's "Valve Index Quick Wallmounts Carrier Alternative" file has great fitment with the base station, so I remixed from there. I made the following changes: - Simplified geometry - Increased the base thickness in order to allow for greater tolerance of screw length. The base station fastens to the wall mount via QTY (2) M5x10 BHCS and M5 hex nuts. M5x12 works too. Fasten the print to your wall via 3M Command Strips. I like the "Damage-Free Haning" Velco-style ones. I use two per base station to be safe. I am not responsible for your broken base station if you fail to properly mount the command strips. Read the instructions. https://www.amazon.com/Command-PH207-12NA-Hanging-Strips-White/dp/B004054NSQ/ref=sr_1_10?crid=G81ZLEYOBHUE&keywords=3m%2Bcommand%2Bstrips&qid=1658872028&sprefix=3m%2Bcommand%2Bstrips%2Caps%2C116&sr=8-10&th=1 This print took 2hr 5min with a 0.6mm nozzle at 0.32mm layer height and 10% infill on a Creatily Ender 3.
Statistics
Likes
0
Downloads
0