MK7/MK 7.5 Fiesta ST Pod Filter Adapter
Description
This is a remix of SuperFrodo's Pod Filter Adapter. I combined the MAF mount to the filter adapter so no epoxy is needed. Some people complained about a check engine light on the original thing. I adjusted the MAF diameter to the OE size on a USDM intake. I measured it at 63.9mm (can someone in the UK or Australia measure theirs to confirm?) I have a USDM Fiesta ST so I can't test if it'll show a code. It's kind of irrelevant to me as they are speed density tuned. I uploaded 4 versions. 1-piece Pod Filter Adapter - 63.9 US OE Diameter: Stock diameter inside, sized for a 3" flange filter. No bracket slot. 1-piece Pod Filter Adapter - 63.9 US OE Diameter - Bracket Slot: Stock diameter inside, sized for a 3" flange filter. Has a bracket slot. So far I haven't had time to design on that fits the oem airbox grommets. I'll design something within the next few weeks to address this. 1-piece Pod Filter Adapter - 4_ Filter: Stock diameter inside (the inside isn't that diameter except for right at the MAF. If you're in the UK, watch for CELs), sized for a 4" flange filter. No bracket slot. 1-piece Pod Filter Adapter - 4_ Filter - Bracket Slot: Stock diameter inside (the inside isn't that diameter except for right at the MAF. If you're in the UK, watch for CELs), sized for a 4" flange filter. Has a bracket slot. So far I haven't had time to design on that fits the oem airbox grommets. I'll design something within the next few weeks to address this. I've included the bracket that SuperFrodo designed. I still need to redesign this or created a bracket to meet this bracket.
Statistics
Likes
0
Downloads
0