Bobcat miner 300 outdoor case with extra room
Description
This is an outdoor case that I have designed for my Bobcat Miner 300. I haven't tested it yet, but it should work. It also has some extra room on the side to put something like an inverter or a mobile hotspot. You will need some waterproof cable joints, latches, something to seal the gap between the lid and the main box with(tape?), and something to seal the small gaps between 3d print layers. The tabs on the bottom are for drilling into to mount it to a pole. You have to mount one side of the clips onto the lid, and the other side onto the main box. There are no holes premade due to different clip size and spacing, so you will need to screw the screws directly into the plastic. I recommend these parts: Cable joints(use the PG7): https://www.amazon.com/eBoot-Plastic-Waterproof-Adjustable-3-5-13mm/dp/B01GJ03AUQ/ref=sr_1_6?crid=21YQT2CPM6FP8&keywords=junction+box+cable+seal+pg10&qid=1658980251&sprefix=junction+box+cable+seal+pg+10%2Caps%2C116&sr=8-6 Clips: https://www.amazon.com/Toggle-Upgrade-Adjustable-Release-Latches/dp/B08R8P37VB/ref=sr_1_10?crid=UNSVKAZYSKRK&keywords=heavy+duty+latch&qid=1658979876&sprefix=heavy+duty+latch%2Caps%2C167&sr=8-10
Statistics
Likes
0
Downloads
0