Airtag mount for MTB or other bike with ~32mm hole.
Description
<h3>Plug for hiding an Airtag in the steer tube of your fork, fits Ø32mm steer tube.</h3> ***<h3>Choose Bottom_lid with or without flange.</h3>*** Add a m5 nut and a 15mm long countersunk m5 screw. Mount the pieces together, sqeeze-ring in the middle, align drainage opening with sqeeze ring. Thread in the screw. 1. Click in your Airtag silvery lid into the holder. If it is too tight, scrape with a a knife or similar on the inside of the rim until it has a snug but possible fit. 2. Push it up from downwards into the steer tube. 3. Make sure the drainage opening is aligned toward to lowest point! 4. Tighten the screw to expand the sqeeze-ring and of you go! To remove it, just loosen the screw and pull in out of the fork! To remove the airtag from the holder, use a longer screw to push it out
Statistics
Likes
0
Downloads
0