Jab5 Lightweight FPV Drone Frame
Description
I carefully designed this frame to be as light as possible while still maintaing a reasonable amount of stability. Tuning is very easy and smooth, it looks like its resonance profile is very forgiving and you can turn off gyro filters completly and need d_term filters only at 110Hz. Top featrues: - 72g weight! - super easy to work with (1 screw arm replacement, all stack screws reachable when fully build, enough room for components) - all electronic parts are nicely protected - lipo can be mounted in a lot of different ways - tpu camera mount integrated into the frame - true x geometry for nice flight experience get the parts in carbon: - 4 arms with 4mm - bottom plate with 2mm . top, sandwich and 2 cam plates in 1.5mm you also need: - 5 x 20mm M3 aluminium standoffs - 6x M3 Nut with 5mm hight - 4x 16mm M3 screw - 2x 12mm M3 screw - 6x 6mm or 8mm M3 screw - 2 x (or 4 if tpu cam mount is needed) 6mm M2 screw - TPU parts to lock the arms in the middle (and to mount the cam if you want that version) Dont build this drone with heavy hardware! 2306/2207 motors maximum! Try to use 20mm stacks, they hold up fine on light weight drones. The weight without a lipo should be at maximum 270g-290g.
Statistics
Likes
0
Downloads
0