Davinci 1.0 Filament Holder
Description
A filament holder for the DaVinci 1.0. These will fit on the build plate, but you will need to rotate them to fit. You will also need an 8.5" length of 1" ID PVC pipe with 1/4" holes spaced 7.5" apart. I included a diagram for reference Make sure to include supports in your slicer. There will be a small support under the pin that goes into the PVC pipe. You will not be able to have the top cover installed with this mount. I also used some zip ties to keep the filament roll centered.
Statistics
Likes
0
Downloads
0