Door Slider
Description
This is the updated version of my barn door slider. I had Version 1 being used daily for more than two years. This is an attempt to make it a little more robust, and have a cooler look to it all. Version 1 can be found here: https://www.thingiverse.com/thing:4149488 (The wall hardware is the same as long as you dont need the extenders) What's different from version 1? -The new bracket is wider, thicker, and stronger than before. -The roller is now a planetary gear because it looks better. -There are not little wall extenders in case your door needs more clearance. What to print: 2x Rollers 2x Brackets (5.0 is a beefy version, 3.0 is thinner and will bend with lots of weight) 2x Left-Right Wall Mount (Mirror it so you have one for each side) 1-3x Mid Wall Mounts What to buy: 1x .5" copper pipe in the length of the slider you want 2x 3/8"x1 1/2" bolt and nut for the bracket and roller 12x short wood screws for mounting the bracket to the door (length depends on the wood)
Statistics
Likes
0
Downloads
0