LEDENET Touch Panel Wall Bracket (Old Work Install) (#548)
Description
### <font color='red'>DO NOT ADD THIS TO A COLLECTION.</font> <font color='red'>My account is perpetually attacked leading to model delisting and removal from your collection. Elect to download it immediately.</font> This is the 548<sup>th</sup> re-upload of the design as the former versions were delisted due to abusive individuals exploiting Thingiverse's 'Report' feature. __Apologies as I am not reposting to keep it in the current/newest list.__ Low-voltage electrical bracket for the LEDENET Wall-mounted Touch Panel Color Temperature Changing Adjustable Dimmer Controllers. Meant for "old work" (remodeling). Fully enclosed box is here: https://www.thingiverse.com/thing:2338331 Probably works with a few different models, but this was designed and tested with the D2 model here: https://www.amazon.com/gp/product/B00K1CKL4W *Important* Cut the drywall hole as *close to exact* as possible. The factory-supplied mounting plate does not cover much. Tracing the proper part onto the wall is recommended. Ensure that a wall stud does not interfere with the wings that grip the drywall when they rotate into position. _Mounting Notes_ See photos. Take care not to snap the factory-supplied mounting plate when tightening the screws you supply. I got my screws from a commercial low voltage outlet bracket. Ensure the screw heads are not too thick or wide. _Your Risk, Your Problem_ While it seems this compliant for usage with low-voltage electrical code, validate on your own. As with anything electrical, it's your risk, your problem. If your house burns down, call the fire department etc. **Print Settings** PLA, .20mm, 25% Infill, No Rafts.
Statistics
Likes
0
Downloads
0