Tuggy Functional Steering Wheel and Throttle Control
Description
Add functional steering and throttle control to your Tuggy! This is a steering system that uses 4:1 planetary gear reduction to give you accurate control. This was designed to work with a Newport Vessels Kayak series trolling motor, but could possibly be modified to work with other units. Print Lists 1x: Base Plate 3x: Planet Gear 1x: Ring Gear 1x: Sun Gear 1x: Washer 1x: Cap 1x: Yoke 1x: Clamp 4x: Cable Brace 1x: Throttle Housing 1x: Throttle Lid + Switch Face* 1x: Throttle Lever Steering Hardware List 1x: Newport Vessels Kayak Series 36lb/55lb Thrust Transom Mounted Saltwater Electric Trolling Motor 1x: 7ft Dometic SeaStar Xtreme Control Cable, CCX633XX 2x: Rod End Bearing, 3/16-inch Bore, #10-32 Female Thread Right Hand 4x: 1/4-20 Rivet Nuts 4x: 1/4-20x1" Socket Head Bolt 3x: 608 "Skateboard" Bearing 1x: 3/4-10x5" Hex Bolt 1x: 3/4-10 Nylock Nut 2x: 10-24x1.25" Socket Head Bolt 2x: 10-24x1" Socket Head Bolt 4x: 10-24 Nylock Nut 1x: Pack of #10 Washers 4x: Standard Size Zip Tie 1x: White Lithium Grease for lubrication Throttle Box Hardware List 4x: 10mm deep M3 Melt-In Thread Insert 4x: M3x12mm Pan Head Screw 3x: 10-24 Rivet Nut 3x: 10-24x.75" Bolt 1x: Silicone/RTV to secure throttle switch
Statistics
Likes
0
Downloads
0