Dell Precision 7510 - Laptop Stand
Description
<p>This Laptop Stand is designed for the Dell Precision 7510 according to the bottom fans that are covering the whole surface. The computer can breath and the fans are not obstructed. You will need 4 M5x20mm screws and M5 bolts. The bolts just fit the right size of the frame extrusion, so you can easily screw them. </p> <b>Parts:</b> - Screws - DIN 7984 - M5 X 20 - CHC low head : x4 - Bolts : x4 <b>Printing</b> - slicer: Cura 5.x - see gcode and 3mf <b>Summary:</b> - layer : 0.2mm (draft) - Filament: Anycubic PLA (very bad) - noz : 201° - bed : 62° - speed : 58-59mm. max - ambient : 28-32 (hot July !) <b>time (Any Kobra)</b> - side 5h50 - bottom 4h40 - top 4h35 Good luck.
Statistics
Likes
0
Downloads
0