Dog Food Lid 1.2kg can
Description
Avoid brittle PLA's for this, it needs some flex. If you are using TPU or other flexible filaments you can scale X Y in for a tighter fit. Snaps on perfectly with this PLA+. Print settings (Cura): Walls x 3 Top/Bottom x 6 .2mm layer height 4mm width 210c print 60 c bed 60mm/s Coasting enabled Flow 94% (gives me accurate measurements without any signs of under extrusion) Coasting Volume 0.032 (helps remove the seem) Fan 0% first layer to 100% at layer 5 No brim or skirt needed
Statistics
Likes
0
Downloads
0