Eufy Dual Camera Mount
Description
I needed the Eufy doorbell to sit flush with the brick siding. Otherwise the brick was going to block the camera view. I designed this so I can rewire the existing doorbell into the extension and connect to the unit. The base adapter plate fits right inside, and you will need at least 3.5 inch screws to mount on the door. Download the file corresponding to the side your doorbell is on. This is for the Dual Camera doorbell: https://www.amazon.com/eufy-Security-Battery-Powered-Detection-Recognition/dp/B099RX62SC?keywords=eufy+dual+camera+doorbell&qid=1659627868&sprefix=eufy+dual+cam,aps,118&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExU0dJMUNYVUhQODVTJmVuY3J5cHRlZElkPUEwMDUyNTc3MVcyUjNHUDJFWlg2WiZlbmNyeXB0ZWRBZElkPUEwMTQ0MDE3M1M1M1RTQjA0VFUwNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU%3D&linkCode=sl1&tag=geekazine-20&linkId=e3b45fc7734ddfe3dc9f70cb3a7f2146&language=en_US&ref_=as_li_ss_tl The addition is 57.5mm wide, so make sure you have a clearance for your door before printing/installing. There is an indent on the side to adjust for any trim on the door. You will have to seal it up during installation. I also mounted it higher than the handle, so I don't hit it when trying to open the door.
Statistics
Likes
0
Downloads
0