LED lighting base for Abraham Lincoln Bust
Description
I ordered a set of 5mm LEDs in 6 colors from Amazon, These LEDs are pre-wire with a resister so the work at 5VDC. You can power them with a USB. I cut the male end off a long cable and used it with a wall wart. https://www.amazon.com/gp/product/B07X61RJ83 I used hotmelt to glue the LEDS at the right height, They should be up high enough so the LED's base is even with the surface of the recesses. I also used hotmelt to hold the cord in and insolate the solder connections. The light assemblies need to be dialed in on your printer or they will probably not go together and in to the base. Slow flow way down if nothing works. Ask and I will try to answer.
Statistics
Likes
0
Downloads
0