Humidifier 30ml Under $5 AUD
Description
Make your own Humidifier for as little as $5 ___________________________________ Step1. Purchase a USB Mini Humidifier DIY Kit from any retailer, I got mine from AliExpress: https://www.aliexpress.com/item/1005001381881723.html?spm=a2g0o.order_list.0.0.3d131802s8IvFL Step2. Print the attached Humid_Final.stl Step3. Assemble as seen in pictures 3&4 (Note the Spring isn’t the greatest, in my build I used an old pen Spring) Step4. Fill with water and press button once to have continuous spray, again for intermittent and a third time for off. Depending on your printer they may be loose or tight fittings. fix this with super glue or a sharp/hot knife. Printed in PETG as it was the lowest Shrinkage rate for price. Spec’s: ______ Storage: 30ml Print Time: 10 hours at 100% infull (Works at 50% haven’t tested less) Run time: 3-4 hours on continuous mode and around 6-7 on intermittent. Water tight: No, when tipped upside down it slightly leaks. ☹ Price: I paid $3.67 for humidifier and this print is about 60g. If you’re roll cost $20 that’s $1.20 making the total $4.87 (my roll cost $15 and I got a deal making my total $ 4.53) Please go easy I’ve been doing this for a while now but I’m still trying to improve. Feel free to remix or give feedback thanks.
Statistics
Likes
0
Downloads
0