Anycubic Mega MK4 MGN12 Carriage
Description
This carriage mounts onto a MGN12 linear bearing and is intended to be used with the excellent "Linear Rail X-Axis" by bartolomeus and "MK4 X-Carriage" by ML3DPrinting. It has a solid ADXL345 accelerometer mount for Klipper's Input Shaping. A separate volcano model drops the fan duct down to nozzle height. M3 hot melt nuts are required to mount parts. Currently there is no cable chain mounts. I used this BL Touch spacer and scaled to 8.5mm thick when using volcano hotend https://www.thingiverse.com/thing:5179760 Before using a linear rail for my x axis, my bed meshes were terrible. The nozzle was too low on the left but too high on the right. I did not realise that I had bent my 8mm smooth rods and tried various fixes without success. One of the fixes I tried was installing new x axis smooth rods but this did not fix the problem as they were bent too. After installing this linear x axis rail, my BL touch bed meshes have been reliable and now have constant nozzle height at all locations of the bed.
Statistics
Likes
0
Downloads
0