Sliding Toothpick Case
Description
Hello! This is my first ever creation so feel free to give feedback or improvements. For this toothpick case you will additionally need a small spring with 3-5mm diameter. (You can also print the slider in cura with a scale of 102-104% so it holds and slides by friction) If necessary: To make the slider fit inside the TOP-piece you need to remove/cut the elephant foot on the bottom. Most importantly remove the elephant foot on the TOP-piece. I also recommend to re-drill the hole of the TOP-piece with a 2.5mm drillbit. ----------------------------------------------------------------------------------------------------------------------- The TOP-piece is pressed inside the box and only holds by friction. So it might be that it fatigues, probalby need to reprint it after time, or fix it otherwise.
Statistics
Likes
0
Downloads
0